@thesis{thesis,
		author={Antono  Vendy and LAKSONO  DAMAR GAYUH},
		title ={PERANCANGAN DAN PERHITUNGAN LMTD ALAT
PENDINGIN GASIFER},
		year={2020},
		url={http://156.67.221.169/2884/},
		abstract={Gasification is a process of converting solid fuel into a flammabel gaseous fuel. In the gasification process,the fuel used is wood biomass,the gas produced from the gasification process can be used as generator feed. The temperature allowed to enter the generator maximum 60-65°C (Rismawan and Wulandari 2013). Therefore we need a cooling system on the gasifer to keep the temperature entering the generator below the specified limit.This study aims to design and manufacture a gasifer cooler,measure the inlet and outlet temperature of gasifer cooler and calculate LMTD of gasifer cooler. The results showed that the highest value from the test was 47,3°C, with the highest outlet temperatur 47,3°C this has met the requirements for the entrance temperature of generator maximum 60-65°C (Rismawan and Wulandari 2013). The lowest LMTD in the first minute was in coconut shell charcoal biomass at 1,67°C and
the highest after 40 minuts was used for empety bunch charcoal biomass at 6,4 °C. The lmtd value of this cooler was influenced by the inlet and cooling water temperature.}
		}