@thesis{thesis,
		author={Yuhanah  Tri and Yuliansah  Riandityo Agung},
		title ={STUDI PEMANFAATAN LIMBAH PLASTIK HDPE (HIGH DENSITY
POLYETHYLENE) DAN ABU TERBANG (FLY ASH) TERHADAP
KUAT TEKAN DAN KUAT TARIK BELAH PADA BETON},
		year={2021},
		url={http://156.67.221.169/4815/},
		abstract={Concrete is a material made from a combination of a mixture of fine aggregate,
coarse aggregate, cement and water. The use of the main mixture of concrete can
be replaced with other materials which of course have met the requirements
stated in the SNI. In this study, it is planned to use the results of burning coal or
what is often called Fly Ash as a substitute for cement and also to use HDPE
plastic waste that has been melted into coarse granules as an added material from
coarse aggregate. The sample used is cylindrical and the planned concrete quality
is fc? 25 MPa with a ratio of 30% Fly Ash waste by weight of cement, HDPE
coarse granules with variations of 0%, 5% and 10% of the weight of coarse
aggregate used. The test parameters are testing the compressive strength of
concrete and testing the split tensile strength of concrete. The compressive
strength test of concrete was carried out at the age of 7, 14 and 28 days and for
testing the split tensile strength of the concrete was carried out at the age of 7 and
28 days in order to find out how much the increase and the difference between
normal concrete at the age of 7 and 28 days. The highest compressive strength
value for the concrete sample with variation 3 is with a mixture of 30% Fly Ash
+ 10% HDPE melted coarse granules, resulting in a compressive strength of
26.610 MPa at the age of 28 days of concrete. For the test results, the highest
split tensile strength of concrete is concrete with variation 3 with a mixture of
30% Fly Ash + 10% HDPE melted coarse granules with a split tensile strength
of 2.878 MPA.}
		}