@thesis{thesis,
		author={Prayoga },
		title ={ANALISA STABILITAS TRANSIEN
MENGGUNAKAN MODEL SVC (STATIC VAR
COMPENSATOR) DAN PSS (POWER SYSTEM
STABILIZER) DISISTEM TRANSMISI 150 kV BALI},
		year={2020},
		url={http://eprints.itn.ac.id/5549/},
		abstract={ANALISA STABILITAS TRANSIEN
MENGGUNAKAN MODEL SVC (STATIC VAR
COMPENSATOR) DAN PSS (POWER SYSTEM
STABILIZER) DISISTEM TRANSMISI 150 kV BALI
Hendra Prayoga, Irrine Budi Sulistiawati, Ni Putu Agustini
hendraojobali@gmail.com
ABSTRAK
Stabilitas transient merupakan kemampuan suatu sistem tenaga untuk
kembali pada kondisi operasi normal setelah mengalami gangguan.
penelitian ini menerapkan pemodelan dengan menggunakan koordinasi
PSS (Power System Stabilizer) dan SVC (Static Var Compensator) untuk
meningkatkan sistem keamanan. Karena metode tunggal tidak cukup
untuk meningkatkan stabilitas. Simulasi dilakukan dengan,
membandingan hasil sebelum pemasangan sesudah pemasangan PSS dan
SVC. Hasil simulasi menunjukan bahwa sebelum pemasangan PSS dan
SVC waktu peralihan sistem setelah terjadi gangguan yaitu sudut rotor t
= 27.2s, daya aktif t: 29.1s, dan daya reaktif t : 28.3s, setelah pemasangan
PSS dan SVC waktu peralihan lebih cepat yaitu sudut rotor t = 24.5s, daya
aktif t: 26.7s, dan daya reaktif t : 24.9s
Kata Kunci - Transient Stability, PSS, SVC


TRANSIENT STABILITY ANALYSIS USING
MODELS SVC (STATIC VAR COMPENSATOR) AND
PSS (POWER SYSTEM STABILIZER) IN BALI 150
kV TRANSMISSION SYSTEM
Hendra Prayoga, Irrine Budi Sulistiawati, Ni Putu Agustini
hendraojobali@gmail.com
ABSTRACT
Transient stability is the ability of a power system to return to normal
operating conditions after experiencing a disturbance. This research
applies modeling using the coordination of PSS (Power System
Stabilizer) and SVC (Static var Compensator) to improve security
systems. Because a single method is not sufficient to increase stability.
The simulation is carried out by comparing the results before installation
after PSS and SVC installation. The simulation results show that before
the installation of PSS and SVC the system switching time after the
disturbance is the rotor angle t = 27.2s, active power t: 29.1s, and reactive
power t: 28.3s, after the installation of PSS and SVC the switching time
is faster, namely the rotor angle. t = 24.5s, active power t: 26.7s, and
reactive power t: 24.9s
Keywords - Transient Stability, PSS, SVC}
		}