Studi Pengaruh Temperatur Pada Permukaan Sel Surya Terhadap Daya Keluaran Berjenis Polycrystalline
Total View This Week0
Total View This Week0
Institusion
Institut Teknologi Perusahaan Listrik Negara
Author
PANGALILA, SALVATORE KEVIN WILLIAM
Makkulau, Andi
Yogianto, Aloysius Agus
Makkulau, Andi
Yogianto, Aloysius Agus
Subject
Teknik Elektro
Datestamp
2022-10-11 06:40:53
Abstract :
Solar cell is a device that can convert sunlight energy to electrical energy with the process of photovoltaic effect with a semi-conductor. Photovoltaic (PV) or better known as solar power Generation (PLTS) is also concerned with several factors to maximize solar energy into electrical energy such as the influence of weather, humidity, the temperature of the solar cell position as well as the wind direction found on the surface of solar cells. In this research this solar cell (photovoltaic) is a poly-crystalline type that is allowed when the weather is sunny and cloudy. The test results showed the temperature effect of the solar cell surface against the output power value. Power (Pout) maximum is found on July 23, 2020 at 11.40 WIB with a tilt angle of 35 ° and a temperature of 47,6° C with the output power value of 100,562 Watt. The temperature is influenced by the intensity of the solar radiation that will make the power (Pout) increase so that the condition of a poly-crystalline solar module will work optimally at 35°C-50°C measured on the surface of the solar cell
Solar cell is a device that can convert sunlight energy to electrical energy with the process of photovoltaic effect with a semi-conductor. Photovoltaic (PV) or better known as solar power Generation (PLTS) is also concerned with several factors to maximize solar energy into electrical energy such as the influence of weather, humidity, the temperature of the solar cell position as well as the wind direction found on the surface of solar cells. In this research this solar cell (photovoltaic) is a poly-crystalline type that is allowed when the weather is sunny and cloudy. The test results showed the temperature effect of the solar cell surface against the output power value. Power (Pout) maximum is found on July 23, 2020 at 11.40 WIB with a tilt angle of 35 ° and a temperature of 47,6° C with the output power value of 100,562 Watt. The temperature is influenced by the intensity of the solar radiation that will make the power (Pout) increase so that the condition of a poly-crystalline solar module will work optimally at 35°C-50°C measured on the surface of the solar cell
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
