Upaya Pendeteksian Suhu Hotspot Dengan Pengukuran Suhu Klem Konduktor Pada SUTT 150 KV GI Tangerang Lama dan Taman Semanan Indah Menggunakan Alat Thermovision
Total View This Week0
Total View This Week0
Institusion
Institut Teknologi Perusahaan Listrik Negara
Author
Al Rasyid R, Hidayahtullah
Hidayat, Syarif
Darmana, Tasdik
Hidayat, Syarif
Darmana, Tasdik
Subject
Teknik Elektro
Datestamp
2022-10-05 01:57:43
Abstract :
In the electricity system in Indonesia under the ministry of BUMN in particular referring to PT PLN (Persero), accustomed to dispense electricity network from power plants to consumer which is onmention with as the transmission and distribution network. If the clamp although conductor temperature gets the peak or highest load when measuring with thermovision. However, it is necessary to strive with thermovision measurements every 3 week serious 2 times. The results of the hotspot finding data on the Durikosambi ? Cengkareng 2 line at the SUTT 150 KV Beauty Semanan Garden resulted in a temperature detection of >30 which indicates the clamp is in an abnormal condition. This is caused by calcification of the clamp joints resulting in high temperatures. In the name tower A24AB, there is a sense of R the direction of entering the Old Tangerang Substation obtains a temperature detection of <30 which means that in normal temperature conditions. As for some prevention of hotspot temperature in from avoid peak load among others, by replacing it buying new clamps and conductors, looking for quality conductor clamp products that are good and often cleaned. The the use of thermovision is here to measure the heat of the jointing or jumper in from to get the ratio value of difference between the clamp temperature and the normal temperature. In addition the thermovision device has another function as securing or protecting the substation equipment so that it doesn?t experience a fire or a power outage.
In the electricity system in Indonesia under the ministry of BUMN in particular referring to PT PLN (Persero), accustomed to dispense electricity network from power plants to consumer which is onmention with as the transmission and distribution network. If the clamp although conductor temperature gets the peak or highest load when measuring with thermovision. However, it is necessary to strive with thermovision measurements every 3 week serious 2 times. The results of the hotspot finding data on the Durikosambi ? Cengkareng 2 line at the SUTT 150 KV Beauty Semanan Garden resulted in a temperature detection of >30 which indicates the clamp is in an abnormal condition. This is caused by calcification of the clamp joints resulting in high temperatures. In the name tower A24AB, there is a sense of R the direction of entering the Old Tangerang Substation obtains a temperature detection of <30 which means that in normal temperature conditions. As for some prevention of hotspot temperature in from avoid peak load among others, by replacing it buying new clamps and conductors, looking for quality conductor clamp products that are good and often cleaned. The the use of thermovision is here to measure the heat of the jointing or jumper in from to get the ratio value of difference between the clamp temperature and the normal temperature. In addition the thermovision device has another function as securing or protecting the substation equipment so that it doesn?t experience a fire or a power outage.
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
