Rancang Bangun Sistem Monitoring Automatic Transfer Switch (ATS) dan Automatic Main Failure (AMF) menggunakan arduino uno berbasis IoT
Total View This Week0
Total View This Week0
Institusion
Institut Teknologi Perusahaan Listrik Negara
Author
ADABSARI, IKHTIARA
Darmana, Tasdik
Hidayat, Syarif
Darmana, Tasdik
Hidayat, Syarif
Subject
Teknik Elektro
Datestamp
2022-10-04 04:42:38
Abstract :
In an office, a hospital or a small industry for the operation must use electricity. All used tools or devices require a power supply. The main power supply used is the source of PLN whose power availability is sometimes not kontiyu. When the source of PLN is not available due to interference or maintenance of the generating system, the device holding the backup power source (Genset) provider so as not to interfere with the operation resulting in losses. One of the advances in technology that ships with the automation system. With the problem faced is a manual transfer time-consuming that resulted in losses to the agency. To deal with that problem, the final task was made a solution to make the main power supply transfer system to the automatic backup power with the ATS and AMF monitoring systems using IoTbased microcontrollers (Internet Of Things). From the results of the test using the load incandescent lamp 100 W and Drill machine 250 W in Get the average value of the current at 0.27 ampere, input voltage of 221.03 volts, output voltage of 221.03 volt and power of 202.28 Watts. For the fuel level using a Level 1 examples of 2.5 cm. Use of microcontroller because the price is relatively cheap compared to PLC and the use of IoT aims to solve data processing problems manually so it is suitable for small industries, hospitals or offices that require a power supply switch at low cost.
In an office, a hospital or a small industry for the operation must use electricity. All used tools or devices require a power supply. The main power supply used is the source of PLN whose power availability is sometimes not kontiyu. When the source of PLN is not available due to interference or maintenance of the generating system, the device holding the backup power source (Genset) provider so as not to interfere with the operation resulting in losses. One of the advances in technology that ships with the automation system. With the problem faced is a manual transfer time-consuming that resulted in losses to the agency. To deal with that problem, the final task was made a solution to make the main power supply transfer system to the automatic backup power with the ATS and AMF monitoring systems using IoTbased microcontrollers (Internet Of Things). From the results of the test using the load incandescent lamp 100 W and Drill machine 250 W in Get the average value of the current at 0.27 ampere, input voltage of 221.03 volts, output voltage of 221.03 volt and power of 202.28 Watts. For the fuel level using a Level 1 examples of 2.5 cm. Use of microcontroller because the price is relatively cheap compared to PLC and the use of IoT aims to solve data processing problems manually so it is suitable for small industries, hospitals or offices that require a power supply switch at low cost.
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
