Abstract :
ABSTRAK
Perlintasan sebidang rel kereta api yang memotong jalan akan memaksa pengendara
untuk menurunkan kecepatan ketika melewati pelintasan dan menaikkan kembali
kecepatan kendaraan setelah melewati perlintasan. Kondisi ini dapat dijelaskan
menggunakan teori gelombang kejut (shockwave). Tujuan dari penilitian ini adalah
untuk mengetahui besarnya tundaan yang terjadi pada perlintasan sebidang rel
kereta api yang terdapat di Jalan Pemuda, Bandar Lampung menggunakan metode
gelombang kejut.
Pada pengamatan siang, saat awal antrian diperoleh kecepatan gelombang kejut ?da
sebesar 6,85 km/jam dan ?ab sebesar -6,69 km/jam. Pada saat arus jenuh dan awal
penormalan diperoleh nilai kecepatan gelombang kejut ?dc sebesar 2,61 km/jam
dan ?cb sebesar -9,07 km/jam. Lalu pada saat akhir penormalan lajur diperoleh
nilai kecepatan gelombang ?ac sebesar 2,72 km/jam. Panjang antrian yang
diperoleh yaitu 5,19 meter dengan tundaan sebesar 33,95 detik dan waktu
penormalan sebesar 45,98 detik.
Sedangkan pada pengamatan sore, saat awal antrian diperoleh kecepatan
gelombang kejut ?da sebesar 1,23 km/jam dan ?ab sebesar -6,38 km/jam. Pada saat
arus jenuh dan awal penormalan diperoleh nilai kecepatan gelombang kejut ?dc
sebesar 1,97 km/jam dan ?cb sebesar -7,51 km/jam. Lalu pada saat akhir
penormalan lajur diperoleh nilai kecepatan gelombang kejut ?ac sebesar 1,80
km/jam. Panjang antrian yang diperoleh yaitu 8,95 meter dengan tundaan sebesar
54,51 detik dan waktu penormalan sebesar 87,32 detik.
Kata Kunci : Gelombang Kejut, Tundaan, Panjang Antrian, Waktu Penormalan.
ABSTRACT
A railway crossing that cuts the road will force motorists to lower speed when
passing the crossing and increase the speed again afterwards. This condition can
be explained using shockwave theory. The purpose of this study was to determine
the magnitude of delays that occurred at the railway crossing on Jalan Pemuda,
Bandar Lampung using the shockwave method.
At noon observation, at the beginning of the queue, the shockwave speed of ?da
was 6,85 km/h and ?ab was -6,69 km/h. At the of normalization, the shockwave
speed of ?dc was 2,61 km/h and ?cb was -9,07 km/h. Then at the end of
normalization, a shockwave speed of ?ac was 2,72 km/h. The queue length obtained
was 5,19 meters with a delay of 33,95 seconds and a normalization time of 45,98
seconds.
While in the afternoon observation, at the beginning of the queue, the shockwave
speed of ?da was 1,23 km/h and ?ab was -6,38 km/h. At the beginning of
normalization, the shock wave speed of ?dc was 1,97 km/h and ?cb is -7,51 km/h.
Then at the end of normalization, a shockwave speed of ?ac was 1,80 km/h. The
queue length obtained was 8,95 meters with a delay of 54,51 seconds and a
normalization time of 87,32 seconds.
Keywords: Shockwave, delay, queue length, normalization time.