Analisa Dan Rancang Bangun Kumparan Stator Eksternal Pada Motor Induksi 3 Fasa
Total View This Week0
Total View This Week0
Institusion
Politeknik Negeri Bengkalis
Author
Fahmi, Muhamad
Subject
451 Teknik Elektro
Datestamp
2022-07-20 14:01:39
Abstract :
Previously there were many new technologies where the driving force was electric power and electric motors. For example the use of the motor on the fan wants, washing machine, blender etc. Types of motors used in electrical equipment are generally 1 phase motor types. In addition to the 1 phase motor, the most widely used motor in the industry is the 3 phase motor. In the system of adding an external stator coil on a 3 phase induction motor there are very important components, namely a 3 phase induction motor and also an external stator coil. Where the planned number of stator turns to be designed is 120 turns and 360 turns with 2 different diameters, the diameter is 1.0 mm and 1.5 mm. This means that the coils are outside the motor, not inside the motor. In the working system of this tool the motor will be tested in the delta connection, and for testing the motor will be seen under normal conditions. From this modification of the stator winding, we will see the effect on the performance of the 3 phase induction motor that has been used. The analysis shows that after adding the motor with an external coil there is a difference between active power, apparent power and reactive power, efficiency, motor slip, and the rotation speed of the motor. However, the difference in value is not too far away, because the resistance of each external coil that is made is small at 0.5 ohms. This test is carried out with a variation of the input voltage, which is the voltage from 10-100 VAC.
Previously there were many new technologies where the driving force was electric power and electric motors. For example the use of the motor on the fan wants, washing machine, blender etc. Types of motors used in electrical equipment are generally 1 phase motor types. In addition to the 1 phase motor, the most widely used motor in the industry is the 3 phase motor. In the system of adding an external stator coil on a 3 phase induction motor there are very important components, namely a 3 phase induction motor and also an external stator coil. Where the planned number of stator turns to be designed is 120 turns and 360 turns with 2 different diameters, the diameter is 1.0 mm and 1.5 mm. This means that the coils are outside the motor, not inside the motor. In the working system of this tool the motor will be tested in the delta connection, and for testing the motor will be seen under normal conditions. From this modification of the stator winding, we will see the effect on the performance of the 3 phase induction motor that has been used. The analysis shows that after adding the motor with an external coil there is a difference between active power, apparent power and reactive power, efficiency, motor slip, and the rotation speed of the motor. However, the difference in value is not too far away, because the resistance of each external coil that is made is small at 0.5 ohms. This test is carried out with a variation of the input voltage, which is the voltage from 10-100 VAC.
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
