Penentuan Jenis Charge Penembakan Dan Depth Penetration Pada Aktifitas Reporforation Di Sumur Yang Memiliki Low Quality Reservoir
Total View This Week0
Total View This Week0
Institusion
Universitas Islam Riau
Author
Iqbal, Muhammad
Subject
T Technology (General)
Datestamp
2022-03-09 04:12:01
Abstract :
Making holes in the casing and cement occurs between the formation with wells that replace the formation fluid can flow into the well. The overall perforation method is carried out on case hole wells and less compact formations. The advantage of using the perforation method is that it can regulate water or gas production. Needed in order to increase the amount of potential that can be obtained from the reservoir to the surface. Not all perforation methods are applied successfully. Because there is a cause of error when choosing the type of gun or cost based on the well, make a formation that has been done perforating to repair the dry hole. The type of gun that will be used in field X is the form of charge / jetting. The form of costs consists of several types of costs, namely Far Penetration and Good Hole Penetration. In the application of perforation, there are several methods used, in which its use considers reservoir characteristics and reservoir pressure to obtain optimal perforation results. Namely the method of overbalance perforation (pressure at perforation> reservoir pressure at the well) and underbalance perforation (pressure at perforation
Making holes in the casing and cement occurs between the formation with wells that replace the formation fluid can flow into the well. The overall perforation method is carried out on case hole wells and less compact formations. The advantage of using the perforation method is that it can regulate water or gas production. Needed in order to increase the amount of potential that can be obtained from the reservoir to the surface. Not all perforation methods are applied successfully. Because there is a cause of error when choosing the type of gun or cost based on the well, make a formation that has been done perforating to repair the dry hole. The type of gun that will be used in field X is the form of charge / jetting. The form of costs consists of several types of costs, namely Far Penetration and Good Hole Penetration. In the application of perforation, there are several methods used, in which its use considers reservoir characteristics and reservoir pressure to obtain optimal perforation results. Namely the method of overbalance perforation (pressure at perforation> reservoir pressure at the well) and underbalance perforation (pressure at perforation
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
