PENGARUH ARUS DAN WAKTU TERHADAP
LAPISAN ZINC PLATING PADA MATERIAL ASTM
A36 DENGAN MENGGUNAKAN PROSES
ELEKTROPLATING
Total View This Week0
Total View This Week0
Institusion
Universitas Islam 45
Author
Wibisono, Gusti Adi
Subject
Manufaktur
Datestamp
2022-08-08 08:22:33
Abstract :
Corrosion is one of the problems that is often found in industry, especially in materials containing iron or carbon steel. And How to Stop Corrosion in Materials by Using Materials with Zinc Coating. This zinc plating layer is an alternative for the automotive industry because in addition to the cost of materials that are cheap, easy, and very easy in the process. This research was conducted to find the ideal current and time used during the plating process, because in every industry the most frequent problems are the thickness that coats the material and the corrosion rate of the material that causes the material to become damaged or no good. This study uses ASTM A36 carbon steeland zinc as a coating. The research was carried out on a tank containing various kinds of chemical liquids and using electric current as conductivity for the coating media. Analysis using layer thickness measurement using dial thickness gauge measuring instrument and weight loss method. The results obtained from searching the current and the ideal time using a current of 900 A and a time of 60 minutes is 0.015 mm or 15 ?m thick and the SST test (Salt Spray Test) at 96 hoursNo White Rust and 144 Hours No Red Rust.
Corrosion is one of the problems that is often found in industry, especially in materials containing iron or carbon steel. And How to Stop Corrosion in Materials by Using Materials with Zinc Coating. This zinc plating layer is an alternative for the automotive industry because in addition to the cost of materials that are cheap, easy, and very easy in the process. This research was conducted to find the ideal current and time used during the plating process, because in every industry the most frequent problems are the thickness that coats the material and the corrosion rate of the material that causes the material to become damaged or no good. This study uses ASTM A36 carbon steeland zinc as a coating. The research was carried out on a tank containing various kinds of chemical liquids and using electric current as conductivity for the coating media. Analysis using layer thickness measurement using dial thickness gauge measuring instrument and weight loss method. The results obtained from searching the current and the ideal time using a current of 900 A and a time of 60 minutes is 0.015 mm or 15 ?m thick and the SST test (Salt Spray Test) at 96 hoursNo White Rust and 144 Hours No Red Rust.
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
