Analisis Kebutuhan Air Penambah untuk Menara Pendingin pada Pilot Project Pengolah Sampah Menjadi Energi Listrik di Bantargebang, Bekasi
Total View This Week0
Total View This Week0
Institusion
Politeknik Negeri Jember
Author
Ishak, M. Mirfanu
Subject
432 - Teknik Produksi (dan Atau Manufakturing)
Datestamp
2022-08-19 03:23:35
Abstract :
Cooling towers are equipment needed in an industry or power plant to supply cooling water. Cold water is initially hot water that has carried out the udap condensation process in the condenser, then lowered its temperature in the cooling tower using air media. The water cooling process in the cooling tower causes partial water loss due to several factors, namely evaporation loss, drift loss and blowdown. The research conducted on May 24 and June 4-6, 2022 obtained results, namely the average water loss based on each factor, including evaporation loss of 37.88 m3/hour, drift loss of 9.58 m3/hour and blowdown of 0.889 m3/hour, so that the makeup water required by cooling tower has an average of 48.4 m3/hour. The effectiveness of the resulting cooling tower has an average of 81.8%.
Cooling towers are equipment needed in an industry or power plant to supply cooling water. Cold water is initially hot water that has carried out the udap condensation process in the condenser, then lowered its temperature in the cooling tower using air media. The water cooling process in the cooling tower causes partial water loss due to several factors, namely evaporation loss, drift loss and blowdown. The research conducted on May 24 and June 4-6, 2022 obtained results, namely the average water loss based on each factor, including evaporation loss of 37.88 m3/hour, drift loss of 9.58 m3/hour and blowdown of 0.889 m3/hour, so that the makeup water required by cooling tower has an average of 48.4 m3/hour. The effectiveness of the resulting cooling tower has an average of 81.8%.
Download
book
BibTex
Latex, Jabref
cloud_download
Original Resource
url resource Institution
