Pemanfaatan Abu Sekam Padi sebagai Substitusi Parsial Pasir pada Mortar Geopolimer
Total View This Week0

Institusion

Institut Teknologi Perusahaan Listrik Negara

Author

Rachmadani Utami, Rr. Nadiyah
Sofyan, Muhammad

Subject

Teknik Sipil 

Datestamp

2022-10-05 04:14:19 

Abstract :
This research has discussed the manufacture of geopolymer mortar using rice husk ash and LDPE powder as a partial substitution of fly ash and sand. The purpose of this research was to determine the effect of partial substitution of rice husk ash and LDPE powder on the characteristics of the resulting geopolymer mortar. The variations used in this research were 4%, 8%, 12%,16% and 20% of partial substitution of RHA and 7,6%, 15,2%, 22,8%, 30,4% and 38% of partial substitution of LDPE powder. The phases of the research is research studies, tools and materials preparation, material testing, mix design, mortar manufacturing, testing and test result analysis. The test result showed a geolymer mortar with 20% RHA and 38% LLDPE produced the highest compressive strength of 11,30 MPa and the lightest weight mortar of 218 grams, compared to normal geopolymer mortal wich produced a compressive strength of 4,30 MPa and weight of 281 grams. Meanwhile, the result of the intial setting time test showed that the more the addition of RHA in the mixture, the longer time required to reach the initial setting time. The absorption test showed that the geopolymer mortar with the additon of RHA and LDPE powder has a small water absorption 

File :
Rr. NADIYAH RACHMADANI UTAMI_201621141.pdf